1. check tire pressure.
It may seem trivial, but considerable benefit in suppressing the consumption of fuel. Because if the air pressure is less, according to research, can lead to dissipation of fuel by 10-15%. So, make sure the tire pressure in the motor pet is always right before driving it.
2.cek wheel condition.
Example of straightness round, smooth rotation of the wheel and more. Service when the wheel rotation precision weight or not, will obviously slow down the motor, the trigger does not center rim (speleng), wheel bearings wear out, or lack of lubrication and so on.
3. adjust the spacing around the brake.
Because, when the brakes to stick, it will make the motor run so hard. So use the same fuel mileage does not match the motor. Hence, set the distance of the motor brake lever play both front and rear at least one third of the overall distance of main lever. Do not are too tight, because it was feared to be attached to the brake.
4. lubricant.
Lubricating oil of good power, able to make the engine rev more easily and can maintain perfect compression in the combustion chamber. This will create more engine power optima, so that the motor run faster (distance away), yet fuel-efficient. Remember that routine substitute for oil and does not exceed the recommended service (each 2,000-2.500KM) will make the engine performance is always fresh and smooth rotation.
5. set valve.
Slit valve is too loose or meeting can make the engine power down. riders also tend membetot more in gas to achieve rapid acceleration, the effect, lots of unused fuel. For that, the estrangement of these components need to be adjusted precisely according to specifications of each motor.
It may seem trivial, but considerable benefit in suppressing the consumption of fuel. Because if the air pressure is less, according to research, can lead to dissipation of fuel by 10-15%. So, make sure the tire pressure in the motor pet is always right before driving it.
2.cek wheel condition.
Example of straightness round, smooth rotation of the wheel and more. Service when the wheel rotation precision weight or not, will obviously slow down the motor, the trigger does not center rim (speleng), wheel bearings wear out, or lack of lubrication and so on.
3. adjust the spacing around the brake.
Because, when the brakes to stick, it will make the motor run so hard. So use the same fuel mileage does not match the motor. Hence, set the distance of the motor brake lever play both front and rear at least one third of the overall distance of main lever. Do not are too tight, because it was feared to be attached to the brake.
4. lubricant.
Lubricating oil of good power, able to make the engine rev more easily and can maintain perfect compression in the combustion chamber. This will create more engine power optima, so that the motor run faster (distance away), yet fuel-efficient. Remember that routine substitute for oil and does not exceed the recommended service (each 2,000-2.500KM) will make the engine performance is always fresh and smooth rotation.
5. set valve.
Slit valve is too loose or meeting can make the engine power down. riders also tend membetot more in gas to achieve rapid acceleration, the effect, lots of unused fuel. For that, the estrangement of these components need to be adjusted precisely according to specifications of each motor.
Tidak ada komentar:
Posting Komentar